G139L – GENESIS “machines for creation” Laser Cutter/Engraver (1300x900mm)

$15,980.00

Our 2nd largest fully-enclosed laser cutter and engraver, the “go to” machine for businesses and schools wanting the functionality that a 1/3 sheet machine offers

The easy to use DSP control system is a snap to understand and can interface with both PC & Mac* via USB, Network or optional Wi-Fi access point.   *optional LightBurn software is required for use with Mac

Please note: some councils are now restricting the external venting of laser cutters direct to atmosphere (not good for our lungs anyway!). This machine is fully compatible with our GENESIS G150FE fume extractor/filter.

The G139L:GEN2 laser cutter/engraver is our 2nd largest fully-enclosed front-loading glass-tube laser cutter (and is small enough to fit through most double or roller door access). This machine offers the precision to do high-detail engraving and will also cut cleanly through 18mm MDF/20mm natural pine timber in our tests with the optional 100W (continuous) tube.

Standard tube: 80W(100Wmax), Optional tube upgrade to: 130W(150Wmax)

When considering the required laser power, please bear in mind that less than 100W laser tubes will give the best engraving results, although a 130W will certainly engrave - the finish won't be quite as high resolution.

If you want the laser cutter with the most versatility in both size capability and range of material that it accepts, this is the one for you. Fully compliant with NZ Electrical (Safety) Regulations these machines and accessories are 100% safe for use in the classroom, home or industrial environment. The cabinet & doors are all lockable and fully earth bonded, have built in RCD devices and operate off a standard single phase, 230V 10A power outlet.

Suitable materials for cutting or etching:

  • Paper/card stock
  • Plywood
  • MDF
  • Leather
  • Felt
  • Rubber
  • Acrylic
  • Glass/Stone (etch only)
  • Natural textiles/fabrics
  • Many more

Included in the basic package is:

  • 1 x G139L:GEN2 100W(130Wmax) continuous laser cutter with removable honeycomb and alloy slat beds sized to 1300x900mm
  • Dual red dot pointer system for easy, quick and "focus piece" free focusing!
  • 1 x Oil-less & quiet Air Compressor with dual air system for optimal engraving and cutting air pressures
  • 1 x Premium 5000 series passive cooler with laser tube protection in event of coolant flow failure
  • 1 x compact & quiet 330W high ouput standard (unfiltered) extractor or you can upgrade to one of our GENESIS G150FE fume extractor/filter systems
  • Simple and powerful laser processing software - Laserworks V8. Upgradeable to LightBurn software for added functionality and Mac compatibility if required.
  • 1 x Toolkit containing maintenance and servicing tools

Overall machine dimensions: W1885mm x D1400mm x H1100mm

Note: the specifications of the G139L laser cutters that we typically hold in stock may differ from those outlined in the basic package above.

This machine is also available for rental and long-term lease! Please contact us for details.

Additional information

Weight 350 kg
Dimensions 184 × 132 × 115 cm
Laser type

Co2 10.6 µm

Laser power

80 watts continuous 100-watts peak

Bed size

1300 x 900 millimetres

Input voltage

220v-240v AC single-phase domestic

Extraction required

Dryer-type domestic vent