G080FE GENESIS – Advanced Table Style Fume Extractor 800m3/hr

1300W variable speed blower system suitable for fume filtration and dust collection for both glass tube and solid state laser cutting/engraving systems.

To suit 700x500 to 900x600 bed laser cutters/engravers. (smaller lasers are able to be accommodated but will look a bit lost on top of the large extractor!)

Four stage filtration and purification is designed to ensure filtration and return cleaned exhaust back to the room:

Primary filter Medium Efficiency Filter Main HEPA filter/Gas filter all of which can be replaced individually to extend each filter’s life and reduce filter ongoing replacement.
Stage 1 - F5 Primary filter removes larger and heaviest smoke & dust particles >=5Micron.
Stage 2 - F8 Medium efficiency pleated filter removes large particles / smoke / dust >=1Micron
Stage 3a - H13 Class HEPA filter removes the smallest of smoke particles >=0.01Micron
Stage 3b - Activated Carbon gas filter to absorb smells & gas >99.7% efficient.

Chassis mounted on moveable castors for easy servicing, comes with 1 x full set of filters & an additional primary (F5) filter pad.

• Dimensions: 1300 x 1188 x 790mm
• Table top size: 1300 x 1125mm
• Power consumption: 1300W
• Maximum airflow: 800m³/hr
• Air pressure: 9600Pa
• Maximum noise: 66dBA
• Connection port diameter: 150mm
• Weight: 182kg

Note: while the exhausted air can be vented back into the room, there can be a faint smoke smell present. Additionally it is ultimately stale air, our suggestion is that the exhausted air be ducted outside if possible.